Ningbo RuiChang Commodity Packaging Co., Ltd

Vacuum pump bottles and jars use a non-pressurized vacuum to dispense liquid. This exciting system creates a pump action that acts as an all-in-one bottle and pump mechanism.

Intuitively, this cylinderless pump allows you to dispense content, without having to remove the lid when the amount of content is low. The benefits outweigh the traditional pump and spray bottle solutions on the market today.

Welfare overview

No need to take a tube

Bottle and pump are light weight

Shelf life is extended by up to 15% (not excessive exposure to air)

Vacuum distribution effect to extract products to reduce waste

Luxury packaging solution

Can be recycled

Single, dual or triple Vacuum bottles provide a wide range of cosmetic solutions in one container

The liquid contents are not in contact with any metal springs that cause oxidation problems.

There is no backflow problem, which solves the problem of airflow back to the bottle after pumping. (This will shorten the shelf life of the contents)

You can make organic and natural products with little or no chemical preservatives

It does not matter whether the bottle is placed on the side or in the inverted position due to the vacuum distribution.

Non-dip tube

The dip tube is used in a conventional pump. When the dispensing pump nozzle is pressed, the liquid contents are pushed through the tube. The dip tube must be cut into the length of the bottle, which can be an expensive and time consuming process. No cylinders make the process obsolete.

Light weight

The cylinderless weight may be lighter than a single bottle with an extra pump. The reason is because the pump is part of an Vacuum container. This is a good factor in shipping and reducing packaging costs.

Increased shelf life

Even for dispensing, cylinders are always sealed. This is because the contents are in a sealed vacuum. The contents of the Vacuum product can be kept fresh as it is not exposed to the air. This extends the shelf life of consumers by 15%.

reduce waste

The vacuum distribution effect draws the product and reduces waste. The basic dispensing solution tends to leave excess liquid at the bottom of the container. Consumers tend to unscrew the pump and add water. Buyers also tend to use a spatula to obtain the remaining cream, lotion or serum. The vacuum pump bottle makes this problem disappear.

Luxury packaging solutions

The most luxurious packaging in the cosmetics industry is acrylic. These are heavy and made of sturdy parts. Vacuum bottles are located in the acrylic range because they look stylish and can be made into a luxurious look with decorative options. The vacuum pump bottle is the first entry point for branded luxury cosmetics.

Recovery factor

Vacuum distribution products can be recycled. The finished bottle can be pushed back into the recycling chain and used again to make new plastic products.

Single, double or triple

Vacuum bottles can be designed as single, dual or triple product solutions. You may need to create a cosmetic that provides body lotion, cream and hand cream. One bottle. A chamber and a pump can be added inside the container to achieve this effective effect.

pollution problem

The liquid contents of the Vacuum bottle are not in contact with any metal spring that can cause oxidation problems. In the cosmetic industry, oxidation can occur when liquid contents encounter metal springs in the actuator of the pump. Unsightly brown or orange residue may appear around the dispensing pump. A cylinderless pump is designed so that the liquid does not encounter the spring.

Reflux

A conventional dispensing pump allows air to flow back into the bottle during dispensing. When air comes into contact with liquid products; it may result in a shortened shelf life. A gas-free bottle with an air pump does not allow backflow because the container is sealed. This solves the airflow problem.

Organic and natural

The sealed chamber and vacuum design allows for the addition of little or no chemical preservatives. This allows the use of organic and natural creams, liquids and serums. These types of products have become very popular among consumers.

Vertical or horizontal

Vacuum containers can be stored sideways or upside down. This does not affect the distribution of the product. Again, this is due to the vacuum distribution. A great marketing perspective for sports, travel or business marketing.

Ningbo RuiChang Commodity Packaging Co , Ltd  . is a professional   Vacuum Pump Manufacturer    in China, which is based on product development, mold design, material selection, production and processing, and “quality”. Efficient production of industry-leading cost-effective cosmetic packaging. For more information visit: https://www.ruichangpacking.com